Installing A Power Supply Unit; Preliminary Steps; Removing The Dummy Cover - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

Power supply
6.2

Installing a power supply unit

Customer Replaceable Unit
(CRU)
Tools: tool-less
6.2.1

Preliminary steps

No steps needed.
6.2.2

Removing the dummy cover

Figure 28: Removing a dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a power supply unit is removed
and not immediately replaced by a new one, a dummy cover must be
reinstalled in the bay to comply with applicable EMC regulations and
satisfy cooling requirements.
106 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2530 M1