2
Section
GETTING STARTED
Figure 5 displays Jumper Blocks K10, K4, K11, and K3 from the component side of the PCB. The
pattern represented below is viewed when the PT-VME161 is placed on a work surface component
side up and the Front Panel closest to the observer. "*" indicates factory configuration.
Device Type
32Kx8, 28 pin
PROM/ROM
* 64Kx8, 28 pin
PROM/ROM
128Kx8, 32 pin
PROM/ROM
256Kx8, 32 pin
PROM/ROM
512Kx8, 32 pin
PROM/ROM
512Kx8, 32 pin, Flash EPROM
Vpp = 5V
All other 32 pin Flash EPROMs
Vpp = 5V
1
32 pin
Flash EPROMs
Vpp = 12V
8Kx8, 28 pin
SRAM/EEPROM/RTC
32Kx8, 28 pin
SRAM/EEPROM
128Kx8, 32 pin
SRAM/EEROM
16 Extensible Single Board Computer/Controller User's Manual
Figure 5: U24 and U36 Jumper Settings
U24 Jumper Positions
K10 K11 K3
U36 Jumper Positions
K4
K10 K11 K3
K4
Need help?
Do you have a question about the PT-VME161 and is the answer not in the manual?