Appendix H Firewall Commands - ZyXEL Communications ZyWALL 10/10 User Manual

The following describes the firewall commands. See the Command Interpreter appendix for information on
the command structure.
FUNCTION
F i r e w a l l
F i r e w a l l
S e t - U p
S e t - U p
config edit firewall active <yes |
no>
config retrieve firewall
config save firewall
D i s p l a y
D i s p l a y
config display firewall
config display firewall set <set #>
config display firewall set <set #>
rule <rule #>
config display firewall attack
config display firewall e-mail
Firewall Commands
COMMAND
ZyWALL 10/10 II/50 Internet Security Gateway
Appendix H
Firewall Commands
DESCRIPTION
This command turns the firewall on or off.
This command returns the previously saved firewall
settings.
This command saves the current firewall settings.
This command shows the of all the firewall settings
including e-mail, attack, and the sets/ rules.
This command shows the current configuration of a
set; including timeout values, name, default-permit,
and etc.
If you don't put use a number (#) after "set",
information about all of the sets/rules appears.
This command shows the current entries of a rule in
a firewall rule set.
This command shows all of the attack response
settings.
This command shows all of the e-mail settings.
Q