Configuring Password; Figure 193 General Setup; Table 135 General Setup - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 User's Guide

Figure 193 General Setup

The following table describes the labels in this screen.

Table 135 General Setup

LABEL
General Setup
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Reset

24.3 Configuring Password

To change your ZyWALL's password (recommended), click MAINTENANCE, then the
Password tab. The screen appears as shown. This screen allows you to change the ZyWALL's
password.
372
DESCRIPTION
Choose a descriptive name for identification purposes. It is recommended you enter
your computer's "Computer name" in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Type how many minutes a management session (either via the web configurator or
SMT) can be left idle before the session times out. The default is 5 minutes. After it
times out you have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never times out, no
matter how long it has been left idle (not recommended).
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 24 Maintenance