Content Filtering Registration And Reports; Introduction To Myzyxel.com - ZyXEL Communications ZyWall 35 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 35:

Table of Contents

Content Filtering Registration

This chapter describes how to register for content filtering and view content filtering reports.

Before you activate content filtering, you must create an account at myZyXEL.com and

Note: To activate content filtering, you need to access myZyXEL.com via the device

on which you wish to register for content filtering.

You can only use the content filtering with the device upon which you register it. You cannot

change devices. Your device's MAC address and serial number (see the sticker on the rear side

of your device) identify it. You need to register separately for each device on which you wish

to enable content filtering.

When registering, you need to enter a PIN (see your iCard). Be sure to buy the correct iCard

for your device. If you wish to try content filtering before buying an iCard, then fill in the trial

application for a free 30-day trial.

Content filtering reports are generated statistics and charts of access attempts to web sites

belonging to the categories you selected in your device content filter screen.

You can also view content filtering reports during the free trial.

device. You can also generate an activation key and service set key that may be needed to use

device-specific feature(s).

Chapter 12 Content Filtering Registration and Reports

is ZyXEL's online services center where you can register your ZyXEL

ZyWALL 35 User's Guide

Troubleshooting