AN186 - Rev. 1.0
DMD2050 FTP
8.2 Ping Program
PING is an application that uses the ICMP Protocol to report if a host is
responding.
1.
To check whether the modem is reachable, use the PING program installed on your
computer along with the modem IP Address set in Section 3.1.2.3.
Example: ping 172.18.100.215
2.
If everything is functioning correctly, replies from the modem will appear on the computer
screen along with the time it took to respond. If unsuccessful, verify the following:
a.
The cables are secured.
b.
The Link Light is illuminated.
c.
The IP Address that is used matches the Modem's IP Address.
d.
The Server and Modem are on the same subnet.
Figure 1. Ethernet Connection
Page 7