How Do I Power On A Management Unit Via A Server Rack (Local Console) - Fujitsu BS2000 SE Series Manual

Calling the SE Manager
2.3 How do I power on a Management Unit via a server rack
(local console)?
Requirement
You are on the server rack of the SE server.
Procedure
Open the server rack
Ê
Pull out the tray with the local console and flip up the screen
Ê
Press the power on button on the MU
Ê
I
The MU powers itself on and starts up. The startup messages are output on the local
console. As soon as the system is ready, you receive the login request.
Enter account and password of an administrator account
Ê
I
Click Login
Ê
After a successful login the Gnome Desktop is loaded.
Click Computer in the task bar (bottom left), to open the application menu:
Ê
Double-click the Firefox icon to open the browser.
Ê
U41857-J-Z125-2-76
By default the local console is attached to the MU. If the connection is attached to
the Server Unit, switch over to the MU using the console switch menu (press the
HOT KEY to call it).
admin is the password of the admin account when the system is supplied. If it has
already been changed (or you are using a different password), you must enter the
current password (see also
page 8).
Powering on the MU via the local console
section "How do I log in on the SE Manager?" on
9