System Commands - NetComm NB4 User Manual

System Commands

System commands allow you to carry out basic system actions. Press the button to execute a
command. Here you will find the following functions:
■
Save All (same as Save Settings on side menu)
■
Restart (Same as Reboot on side menu)
■
Restore Defaults (same as pressing and holding the button on the back to clear and reset to
factory default.
Note: If you Restore Defaults you will need to reconfigure your internet connection
settings, ISP Username & Password etc.
NB4 User Guide
46
YML733Rev1
www.netcomm.com.au