Introduction; Overview; Features - NetComm NTC-5000 Series User Manual

Introduction

Thank you for purchasing an Industrial HSPA Cellular Network Router from NetComm. This manual illustrates how to set-up and configure
your router appropriately for your chosen task. The router is primarily managed and configured via a web browser. This manual will take you
through the steps required to configure and use your unit correctly.

1.1 Overview

An NTC-5000 series router allows you to build wide area networks utilising the superior speeds supported by 3G UMTS networks.
Employing an embedded 3G modem module, the router offers downlink speeds of up to 7.2Mbps and uplink speeds of up to 5.76Mbps.
The NTC-5000 series provides the user with a point-to-point or point-to-multi-point communications link in a single, compact and
resilient unit.
As a fully featured cellular router, it supports a large number of communication interfaces and protocols to meet the demands of today's
telemetry and WAN applications.
Designed with remote installations in mind, the NTC-5000 series supports multi-level system monitoring giving the user peace of mind that
the device will keep the lines of communication up and open.

1.2 Features

Powerful industrial mobile broadband router platform supporting various networks and service types offering UMTS/HSPA and
quad-band GSM/GPRS/EDGE network access
Embedded Sierra HSPA modem module MC8790V (NTC-5908) or MC8792V (NTC-5909) or MC8795V (NTC- 5900) with
Qualcomm MSM6290 chipset
Wide area data access speeds in 3G mode up to 7.2Mbps in downlink (HSDPA category 8) and up to 5.76Mbps in uplink
(HSUPA category 6)
Wide area data access speeds in 2G mode up to 236 kbps (EDGE multi slot class 12)
Industrial features – rugged enclosure, wide operating temperature range -30°C to 70°C, wall mount option and locking DC
power terminal block
Wide input voltage range 8 – 28 V DC suitable for diverse environments and applications
Web interface for easy centralized configuration and management from any PC
One 10/100Base-TX port for Ethernet connections
Supports SNMP with mobile broadband specific MIB, PPPoE, RIP, VRRP, DDNS, DHCP and DHCP Relay
System monitoring, remote diagnostics and configuration over the air and a diagnostic log viewer via a web browser
Supports NAT, Port forwarding and a DMZ host
Configurable APN profiles, offers an APN drop-down list to make selecting the appropriate APN easier
Supports manual network scan
Recovery mode to restore router system software in the event of corruption
YML5000
www.netcomm.com.au
NetComm CallDirect Series - NTC-5000 Series
NTC-5000 User Guide
5