Management Console Login Procedure - NetComm 3G22WV User Manual

Step 6
A summary of your settings is shown. If you need to make any corrections to the settings click the Back button, otherwise, click the
Finish button to begin using your router.

Management Console Login Procedure

After first time setup, the management console will be password protected to prevent unauthorized access to the configuration
settings of your 3G22WV.
To log in to the management console and view the status and make changes to your 3G22WV, please follow the steps below:
1. Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.20.1 or http://my.router
2. Click the Login tab on the left and enter the username and password configured during the first time setup process then
click the "Submit" button. The default username and password is "admin" if the details haven't been customized. Click the
"Submit" button to continue.
Please Note: If you forget the username and password you selected during the 3G22WV set-up process, holding the
reset button for over 10 seconds will restart the unit with the original settings (username: admin / no password).
3G22WV – 3G WiFi Router with Voice User Guide
15
Figure 8 - Setup wizard Step 6
www.netcommwireless.com