Setting Paper Size: Wide Paper - Konica Minolta bizhub PRESS 1250 User Manual

6.6 Paper Presetting
5
Enter the lengthwise/widthwise dimensions of the paper.
% Press [(1)], then use the touch panel keypad, [,], [+], or control panel keypad to enter the desired
lengthwise dimension. Press [(2)] to similarly enter the desired widthwise dimension.
% Available range depends on the paper tray to be loaded.
6
Make a selection for [Image Pos.]
% Select [Lead Edge], [Rear Edge], or [Center] provided under [Image Pos.] to specify the standard of
image position.
7
To recall a custom size previously registered, press [Size Recall].
The Size Recall Screen will be displayed.
% Press [Previous] or [Next] to scroll to the desired custom size. Entries from [01] to [20] are provided
on the screen.
% Press the number key of the custom size to be used, then press [OK].
8
Press [OK] on the Size Setting Screen to return to the Paper Presetting Screen.
d
Reference
The custom size registration can be made from [Custom Reg./Del.] provided on the Machine Screen. For de-
tails, see Section 3 of the POD Administrator's Reference.
6.6.6

Setting Paper Size: Wide Paper

1
Press [Paper Presetting] on the Copy Screen to display the Paper Presetting Screen.
2
Press a tray key provided under [Paper Tray] to select the tray to change the setting.
bizhub PRESS 1250/1052
6
6-46