To Specify The Size Of Paper Loaded Into The 1St Tray ("Tray1 Paper" Function) - Konica Minolta Di1611 Advanced Information

7
To specify the size of paper loaded into the 1st Tray ("TRAY1
PAPER" function)
1
Select the "PAPER SOURCE
SETUP" menu.
Refer to "To select the "PAPER
SOURCE SETUP" menu" on
page 7-14.
2
Press the [2] key from the 10-Key
Pad to select "TRAY1 PAPER".
3
Using the
"PLAIN", "OHP", "CARD" or
"ENVELOPE", and then press the
[Yes] key.
4
Using the
either "AUTO" or "SIZE INPUT", and
then press the [Yes] key.
If "AUTO" was selected, the
"PAPER SOURCE SETUP"
menu appears again.
If "SIZE INPUT" was selected, a screen appears, allowing you to
specify the paper size.
5
Using the 10-Key Pad, enter the
paper length (mm), and then press
the [Yes] key.
The paper length can be set
between 140 mm and 432 mm.
If you wish to correct the setting,
press the [No] key, and then enter the new number.
7-16
and keys, select
and keys, select
Utility Mode – Copy Functions
Di1611/Di2011