Non-Sort / Collated / Uncollated Output To The Primary (Main) Tray - Konica Minolta bizhub pro 1050 User Manual

Non-sort / Collated / Uncollated Output to the Primary (Main) Tray

A machine with Finisher FS-503 installed is set to collate output to the primary
(main) tray by default, regardless of whether or not other optional devices are
attached. Please select an output mode by following the procedures described
below.
You can change the initial output settings as described in POD Administrator's
reference (Utility Menu Screen > 03 Copy Setting > 01 Reset Setting > 01
Initial Setting). See POD Administrator's reference p. 4-24 for details.
Specifications for Non-sort / Collated / Uncollated Output to the Primary (Main) Tray
❒ Paper size: 12"x18", 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5",
5.5"x8.5"R, A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, standard index paper,
wide size paper (maximum 12.76" x 18.11")
❒ Paper weight: 11 - 64 lb Bond
❒ The primary (main) tray's specifications are described separately. See p. 3-2 to
p. 3-7 for details.
1.
Touch Output Application on the Copy Screen.
The Output Application Screen appears.
The output tray location is indicated by a depressed key on the front image
of the machine. If the primary (main) tray is not selected as the output tray,
touch Output Tray to select it.
Changing output trays is described separately. See p. 12-6 for details.
12-14
Using Finisher FS-503 (continued)