Non-Sort/Collate/Uncollate Output To The Primary (Main) Tray - Konica Minolta bizhub PRO C5501 User Manual

12
12.3.1

Non-sort/collate/uncollate output to the primary (main) tray

A machine with Finisher FS-520 installed is set to collate output to the primary (main) tray by default,
regardless of whether or not to be equipped with other optional devices.
Please select an output mode by following the procedures below.
!
Detail
You can change the initial output mode in the Utility setting. See the User's guide – POD Administrator's
reference for details.
For detailed specifications, see page 3-3 and page 7-5.
1
Position the original.
2
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
Output tray positions are indicated as square marks on the front image of the machine, and the tray
mark currently selected appears highlighted.
If the primary (main) tray is not selected, touch [Output Tray] to select it.
For details on selecting an output tray, see page 12-3.
3
Select the desired output mode.
– For Non-sort output, cancel both [Collate] and [Uncollate].
– For Collate output, touch [Collate] to highlight it.
– For Uncollate output, touch [Uncollate] to highlight it.
– Select output face (Face Down / Face Up), and output order (1 to N / N to 1) as needed.
4
Touch [OK] on the Output Application Screen.
The specified output mode icon will be displayed on the Copy Screen.
Reminder
The primary (main) tray gradually goes down while printed materials are output. DO NOT allow any
object to interfere with the operation of the tray on the left side of the finisher, as any interference may
cause damage to the finisher.
Be careful not to exceed the finisher tray capacity when selecting the print quantity, otherwise
unexpected trouble may be caused.
12-8
Output applications
bizhub PRO C5501