Mishandled Paper Codes - Konica Minolta 1216 User Manual

Troubleshooting

Mishandled Paper Codes

Mishandled Paper locations are conveniently displayed on the control
panel diagram, as shown below. When mishandled paper occurs, a
specific J Code also flashes in the ratio window on the control panel,
and the Start Print light changes to amber, indicating the WAIT
condition. Copying is not possible in this condition.
A label illustrating the removal of mishandled paper is also located
inside the front door of the copier.
The following pages illustrate how to remove mishandled paper from
each area of the copier.
Copier Diagram
8
6
7
NOTE: When removing mishandled paper, be sure to leave no torn paper inside the
machine, avoid touching or scratching the drum in any way, and keep all metal and
magnetic objects, e.g., watches, jewelry, etc., away from the drum area.
9-4 Troubleshooting
9
5
1
2
3
4
1 J11 Main Body Paper Feed
2 J12 Main Body Paper Feed
3 J13 Drawer Base Paper Feed
4 J14 Drawer Base Paper Feed
5 J16, J31 Bypass
6 J32 Paper Exit
7 J72 Sorter
J75 In-Bin Stapler (ST-104)
8 J61, J62 ADF Paper Feed
9 J63, ADF Paper Exit