Main Pba And Smps/Hvps Board - Muratec F-116 Field Engineering Manual

Disassembly and Reassembly

3.14 Main PBA and SMPS/HVPS board

1. Take out the Cassette unit.
2. Remove Front cover / Rear cover / Scan Ass'y / Right cover. (refer to 3.4~3.7)
3. Remove 10 screws (bottom x 9 , rear x 1 ) and 2 connector. (SMPS x 1 , Fan x 1)
4. Turn the board shield over.
5. Remove 5 screw and unplug all connectors on Main PBA. Then release the Main PBA.
6. Remove 5 screw and unplug all connectors on SMPS/HVPS board. Then release the SMPS/HVPS board.
3-15