Sharing Content Using Multiple Content Resolutions Mode; Guidelines For Sharing Contents Using Multiple Content Resolutions - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
2 In the MCMS_PARAMETERS tab, double-click the MIN_H239_HD1080_RATE entry.
The Update Flag dialog box is displayed.
3 In the Value field, enter the minimum line rate at which HD1080 Resolution Content will be enabled.
Enter 0 to disable this flag and prevent HD Content from being used.
4 Click OK to confirm and exit the Update Flag dialog box.
5 Click Close to exit the System Flags dialog box.
Sharing Content Using Multiple Content Resolutions
Mode
Multiple Content Resolutions option is not supported in Ultra Secure Mode.
In Multiple Content Resolutions mode, content is shared in multiple streams, one for each video protocol:
H.263 and H.264. This allows endpoints with different protocols to connect and disconnect without having
to restart Content sharing in the middle of a conference.

Guidelines for Sharing Contents using Multiple Content Resolutions

● Multiple Content Resolutions is supported only in VC CP conferences.
● When Multiple Content Resolutions is enabled, Content is always provided to H.264 HD endpoints.
Resolutions of HD720p30 and HD1080p15 are supported.
● When Multiple Content Resolutions is enabled, the Send Content to Legacy Endpoints option is
selected and cannot be deselected.
● Additional resources are allocated to the conference (in addition to the resources occupied by the
conference participants) for processing the content:
 Resources are allocated only when content sharing is started.
Polycom®, Inc. 164