Enabling The Send Content To Legacy Endpoints Option; Changing The Default Layout For Displaying Content On Legacy Endpoints - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide

Enabling the Send Content to Legacy Endpoints Option

The Send Content to Legacy Endpoint option is enabled in the Conference Profile - Video Quality tab.
If the Conferencing Mode is set to Video Switching, the Send Content to Legacy Endpoints option is
disabled.
If the Same Layout option is selected in the Conference Profile - Video Settings tab, the Send Content
to Legacy Endpoints option is disabled.
Note: Select this option when Avaya IP Softphone will be connecting to the conference.

Changing the Default Layout for Displaying Content on Legacy Endpoints

The default layout that will be used to display Content on the screens of legacy endpoints is defined by the
system flag LEGACY_EP_CONTENT_DEFAULT_LAYOUT.
The configured default layout is 1+4 ( ). You can change the default layout
CP_LAYOUT_1P4VER
configuration by entering a new value for the flag in the system configuration.
Polycom®, Inc. 169