Hardware Installation And Setup - Polycom 1500 Getting Started Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide

Hardware Installation and Setup

In a well-ventilated area, mount the MCU unit in a 19" rack. It is important to adhere to the Site Requirements
as described in the RealPresence Collaboration Server 1500/2000/4000 Hardware Guides, Site
Requirements.
The following procedures have to be performed to install the Collaboration Server in your site.
To maximize conferencing performance, especially in high bit rate call environments, a 1Gb
connection is recommended for all Collaboration Server types.
● Installing the Collaboration Server in a rack or as a standalone. When installing the Collaboration
Server unit on a rack, this process is done in two stages:
 Installing the telescopic rail runners on the rack. This stage is identical to all system types.
 Mounting the Collaboration Server on the rack using the previously installed rail runners
● Connecting the Collaboration Server to the power source
● Connecting the network (LAN and ISDN) cables to the Collaboration Server.
Polycom®, Inc. 32