Optional. Installing The Rtm Isdn Card On The Realpresence Collaboration; Server (Rmx) 2000 - Polycom 1500 Getting Started Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
Optional. Installing the RTM ISDN Card on the RealPresence Collaboration Server
(RMX) 2000
If the ISDN option was purchased with your Collaboration Server, the ISDN card is shipped separately and
must be manually installed into the rear of the RealPresence Collaboration Server (RMX) 2000. It is
recommended to install the ISDN card before the RealPresence Collaboration Server (RMX) 2000 is placed
in a rack.
Removing the blank cover from the rear of the RealPresence Collaboration Server
(RMX) 2000
Use the following procedure to remove the blank cover:
1 Ensure that the power switch/circuit switch on the Collaboration Server is turned OFF (O).
2 Unscrew the captive screws on the rear panel of the Collaboration Server that secure the blank
panel.
3 Use the metal ejector levers to pull the blank panel.
Polycom®, Inc. 42