Table of Contents
Advertisement
Hardware Installation and Setup
Installing the RMX 1500
The RMX 1500/RMX 2000 unit should be mounted in a 19"rack in a well
ventilated area. The RMX 4000 unit can be mounted in a 19" or 23"rack in
a well ventilated area. It is important to adhere to the Site Requirements as
described in the RMX 1500 & RMX 1500/2000/4000 Hardware Guides, "Site
Requirements" on page 1-3.
For detailed instructions, precautions and requirements for installing the RMX
1500 refer to the Polycom RMX 1500 Hardware Guide.
The following procedures have to be performed to install the RMX 1500 in
your site:
•
Installing the RMX in a rack or as a standalone
•
Connecting the RMX 1500 to the power source
•
Connecting the network (LAN, IP and ISDN) cables to the RMX.
Mounting the RMX 1500 in a Rack
There are two methods for installing the RMX in a 19" rack:
•
Using the chassis runners on the RMX 1500
— Install the chassis runners provided by Polycom in the rack using
the screws supplied by the rack manufacturer; two screws per
chassis runner.
Polycom RMX 1500/2000/4000 Getting Started Guide
2-9
Advertisement
Table of Contents
