Polycom 1500 Getting Started Manual page 82

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
18 Define the following parameters
Fast Configuration Wizard – ISDN Service Settings
Field
Network Service Name
Span Type
Service Type
Polycom®, Inc.
Description
Specify the service provider's (carrier) name or any other name you choose, using up
to 20 characters. The Network Service Name identifies the ISDN/PSTN Service to
the system.
Default name: ISDN/PSTN Service
Note: This field is displayed in all ISDN/PSTN Network Properties tabs and can
contain character sets that use Unicode encoding.
Select the type of spans (ISDN/PSTN) lines, supplied by the service provider, that
are connected to the Collaboration Server. Each span can be defined as a separate
Network Service, or all the spans from the same carrier can be defined as part of the
same Network Service.
Select either:
• T1 (U.S. – 23 B channels + 1 D channel)
• E1 (Europe – 30 B channels + 1 D channel)
Default: T1
Note: Only one Span Type (E1 or T1) is supported on the Collaboration Server. If
you define the first span as type E1 all other spans that you may later define must
also be of type E1.
PRI is the only supported service type. It is automatically selected.
73