Polycom 1500 Getting Started Manual page 124

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
New SVC Conference – General Parameters (Continued)
Field
Routing Name
Profile
ID
Maximum Number of
Participants
Polycom®, Inc.
Description
Routing Name is the name with which ongoing conferences, Meeting Rooms,
Entry Queues and SIP Factories register with various devices on the network
such as gatekeepers and SIP servers. This name must be defined using ASCII
characters.
Comma, colon and semicolon characters cannot be used in the Routing Name.
The Routing Name can be defined by the user or automatically generated by
the system if no Routing Name is entered as follows:
• If ASCII characters are entered as the Display Name, it is used also as the
Routing Name
• If a combination of Unicode and ASCII characters (or full Unicode text) is
entered as the Display Name, the ID (such as Conference ID) is used as the
If the same name is already used by another conference, Meeting Room or
Entry Queue, the system displays an error message and requests that you
enter a different name.
The system displays the name of the default Conference Profile.
The default Profile is set to mixed CP and SVC conferencing Mode.
Select the required Profile from the list.
The Conference Profile includes the Conferencing Mode, conference line rate,
media settings and general settings.
For a detailed description of Conference Profiles, see the Polycom®
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000
Administrator's Guide, Using Conference
Enter the unique-per-MCU conference ID. If left blank, the MCU automatically
assigns a number once the conference is launched.
This ID must be communicated to conference participants to enable them to dial
in to the conference.
Note: If setting the Conference ID to the digits that are used for MCU prefix in
Gatekeeper (for example gatekeeper prefix is set to 10 and the conference ID is
1001), the system will not be able to dial to the destination conference as the
prefix digits are truncated from the conference ID, preventing the system from
locating it.
Note: If SIP Factories are used do not use the number 7001 as an ID. 7001 is
the default SIP Factory ID.
Indicate the total number of participants that can be connected to the
conference. The automatic setting indicates that the maximum number of
participants that can be connected to the conference is determined according to
resource availability.
Note: If a number is specified, it should be large enough to accommodate the
participants specified in the Reserve Resources for Video/Audio Participants
fields.
Profiles.
115