Polycom 1500 Getting Started Manual page 84

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
Fast Configuration Wizard – PRI Settings
Field
Dial-out Prefix
21 Click Next.
The Span Definition dialog box opens.
22 Define the following parameters:
Fast Configuration Wizard – Spans Definition
Field
Framing
Side
Polycom®, Inc.
Description
Enter the prefix that the PBX requires to dial out. Leave this field blank if a dial-out
prefix is not required.
The field can contain be empty (blank) or a numeric value between 0 and 9999.
Default: Blank
Description
Select the Framing format used by the carrier for the network interface from the list.
• For T1 spans, default is SFSF.
• For E1 spans, default is FEBE.
Select one of the following options:
• User side (default)
• Network side
• Symmetric side
Note: If the PBX is configured on the network side, then the Collaboration Server unit
must be configured as the user side, and vice versa, or both must be configured
symmetrically.
75