Polycom 1500 Getting Started Manual page 89

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
31 Click the check boxes in the Attached field to attach spans (E1 or T1 PRI lines) to the network
service named in the Network Service Name field.
The Spans Table displays the configuration of all spans and all ISDN network services in the system.
When using the Fast Configuration Wizard during First Entry Configuration, you are defining the first
ISDN/PSTN Network Service in the system. Spans can only be attached to this service.
Additional ISDN/PSTN Network Services can be defined by using the ISDN/PSTN Network
Services > New PSTN Service button in the Collaboration ServerWeb Client.
Spans can be attached to, or moved between ISDN network services by using the ISDN/PSTN
Network Services > ISDN Properties > Spans tab in the Collaboration Server Web Client.
 RMX 2000/4000 - Each ISDN RTM card can support either 7 E1 or 9 T1 PRI lines.
 RMX 1500 - Either 4 E1 or 4 T1 PRI lines are supported.
E1 and T1 connections cannot be used simultaneously.
32 Click Next.
The RMX Time dialog box is displayed.
33 Set the RMX Time using one of the three available options: setting the RMX Time manually, clicking
the Retrieve Client Time button, or using the NTP Servers options.
Fast Configuration Wizard - Collaboration Server Time
Field
GMT Date
Local Time
GMT Time
Polycom®, Inc.
Description
The date at Greenwich, UK.
The MCU's local time settings, are calculated from the GMT Time and the GMT
Offset.
Displays the MCU's current GMT Time settings.
Option 1: Manually setting the Collaboration Server time:
• Using the Up or Down arrows alter the GMT Time and the GMT Offset to set the
Collaboration Server time.
80