Osc Volume / Input - Access Virus Rack User Manual

TOEFFECTS An alternative to INPUT
Static mode, here the audio signal is
routed directly to the effects section of
the SINGLE program or PART. This mode
doesn't use the voices of the Virus, which
means that its polyphonic performance
remains fully intact and available. The
filter section is unavailable in this mode.
01111111111111111112
1 INPUT
Mode Dynamic≤
61111111111111111154
í

OSC Volume / Input

When one of the two INPUT modes is
activated, the OSC VOL parameter rather
than the oscillators controls the level of
the INPUT signal in front of the Filter sec-
tion and of course also the gain of the
SATURATION stage. In INPUT Dynamic
mode, the level increases quite rapidly
when you play several voices polyphoni-
cally. The reason for this is that – in con-
trast to when you're dealing with several
oscillator signals – the voices are corre-
lated because they are receiving an iden-
tical input signal. In the event that the
Virus generates distortion when you're
dealing with this type of signal routing
set-up, be sure to back off the input level
a tad via the OSC VOL knob.
ACCESS VIRUS RACK 79
Audio Inputs