Multi Parameters In The Ctrl Menu; Part Select; Part Enable; Midi Channel - Access VIRUS Owner's Manual

MULTI Parameters in the CTRL Menu

PART SELECT 1 - 16

Lets you chose one of the 16 PARTs for further processing. The current Partnumber is displayed in the
upper left of the LCD.
You can also switch from PART to PART by pressing and holding the MULTI button and
simultaneously selecting a new PART via the VALUE buttons or the VALUE knob. In MULTI
MODE and MULTI SINGLE MODE, you can select Parts via the Parameter buttons, if there is
no Menu selected (Playmode).

PART ENABLE

Switches the MIDI receive mode of a given PART ON and OFF, i.e. enables reception of MIDI data.

MIDI CHANNEL

Selects the MIDI channel of the PART.

LOW KEY

Determines the lowest MIDI note that the PART responds to.

HIGH KEY

Determines the highest MIDI note that the PART responds to.
69