Print Quality - Compuprint Z03 User Manual

4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired language
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration

Print Quality

When emulation mode is set to 4247, 4202 III XL, or 2381 Personal Printer, you can
set the printer to any of the following values:
v Fast Draft Quality (Default)
v DP Quality
v DP Text Quality
v Near Letter Quality
v OCR-A
v OCR-B
When emulation mode is set to Epson-FX, you can set the printer to any of the
following values:
v Fast Draft Quality (Default)
v DP Quality
v Courier
v Gothic
v OCR-A
v OCR-B
Notes:
1. This parameter can be overridden by the computer.
2. Only OCR-A and OCR-B are valid when either OCR-A or OCR-B is selected as
To change or check the Print Quality, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
78
User's Guide
ASCII Configuration
Print Language
value is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
the print language.
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
Print Quality
Print Quality is displayed.