Pacing Control - Compuprint Z03 User Manual

4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER and the printer displays
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
8. Press ENTER.
9. Press START or RETURN to exit the Menu. See "Exiting the configuration

Pacing Control

You can set the Pacing Protocol to:
v DTR (Default)
v XON/XOF
To change or check the Pacing Protocol setting:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER and the printer displays
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
8. Press ENTER.
9. Press START or RETURN to exit the Menu. See "Exiting the configuration
98
User's Guide
ASCII Configuration
Serial Interface
Serial Interface
Parity
Parity is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
Serial Interface
Serial Interface
Pacing Protocol
Pacing Protocol is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.