Maximum Print Position (Mpp) - Compuprint Z03 User Manual

Maximum Print Position (MPP)

The maximum print position (MPP) equals the number of characters the printer
prints on a line. The default value is 136.
The CPI setting you choose directly influences the MPP value you select. The MPP
and CPI settings determine the length of the print line. The maximum line length
for the printer is 345.44 mm (13.6 in.).
The CPI setting and the line length determine the MPP. Multiply the CPI by the
line length to determine the appropriate MPP:
MPP = CPI x line length (in inches)
Notes:
1. Setting the MPP larger than the paper width can result in lost data because of
2. This parameter can be overridden by the computer.
To change or check the MPP value, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration
If your CPI is:
10
12
15
16.7
17.1
20
printing on the platen and may damage the platen and the printhead.
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
Maximum Print Position
MPP is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
MPP cannot be greater than:
136
163
204
227
233
272
Chapter 7. ASCII Configuration
73