Attachment; Ipds Configuration; Attachment Category - Compuprint Z03 User Manual

Table 1. Configuration storage category (continued)
Parameters
Recall Custom Set
Power-On Custom Set
Power-On Paper Source
Recall Factory Defaults
Note: Use Recall Factory Defaults to set all the parameters to the manufacturing default values. See "Recall factory
defaults" on page 54.

Attachment

Table 2 lists the parameters available for the Attachment Category. Refer to
Chapter 5, "Attachment Options," on page 57 for detailed information on setting
these parameters
Table 2. Attachment Category
Parameters
Attachment

IPDS Configuration

Table 3 lists the parameters available for the IPDS Configuration Category.
Parameters that can be overridden by the computer are noted with a dagger (†).
Refer to Chapter 6, "IPDS Configuration," on page 59 for detailed information on
setting these parameters
Table 3. IPDS Configuration Category
Parameters
† Characters Per Inch
† Lines Per Inch
† Maximum Print Position
† Maximum Page Length
† Print Quality
Host Fast Draft
† Print Language
Host Fast Draft
Values
Custom Set A-H
Last Used Custom Set A-H
Front
Rear
Last Used
Yes
Values
Hot Port Switch, Parallel,
Serial, USB, LAN ASCII,
LAN IPDS
Values
10
12
15
16.7
6
8
001 to 227
001 to 880
Fast Draft Quality
DP Quality
DP Text Quality
Near Letter Quality
Enabled
Disabled
037 to 1149
Supported Print Languages
See Table 13 on page 64.
Disabled
Enabled
Chapter 3. Checking and changing configuration parameter values
Default
N/A
Last Used
Front
N/A
Default
Hot Port Switch
Default
10
6
132
066
Fast Draft Quality
Enabled
500 International 5
Enabled
41