Printer Adjustment; Printer Adjustment - Compuprint Z03 User Manual

Table 5. Printer setup (continued)
Parameters
Graphics Print Direction
Perforation Safety
Jam Sensors

Printer adjustment

Table 6 lists the parameters available for the Printer Adjustment Category. Refer to
Chapter 9, "Printer Adjustments" for detailed information on setting these
parameters.
46
User's Guide
Table 6. Printer Adjustment
Parameters
Front AFTA*
Front Tear Position
Front Left Margin Alignment
Front Paper Load Position
Rear AFTA*
(when optional second tractor is installed)
Rear Tear Position
(when optional second tractor is installed)
Rear Left Margin Alignment
(when optional second tractor is installed)
Rear Paper Load Position
(when optional second tractor is installed)
*Fixed values in 0.5 increments (for example, Fixed 1, Fixed 1.5...Fixed 8)
Values
Unidirectional
Bidirectional
Disabled
Enabled
Enabled
Disabled
Default
Unidirectional
Disabled
Enabled
Values Default
−5 to +3 0
Fixed 1 to 8
−390 to +30 0
0 to 60 0
−30 to +360 0
−5 to +3 0
Fixed 1 to 8
−390 to +30 0
0 to 60 0
−30 to +360 0