Continuous Forms Linking - Compuprint Z03 User Manual

Even if Rear Forms Backup is disabled, the SCROLL/MICRO can still be used for
the paper path. You can define the rear forms backup to any one the following
values:
Enabled (Default)
Disabled
To change or check the Rear Forms Backup:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for Rear
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration

Continuous Forms Linking

This parameter is displayed only if the second (optional) tractor is also installed.
Both Front Forms Backup and Rear Forms Backup must have the same values
(either both enabled or disabled) for the continuous forms sources to be capable of
being linked.
This parameter instructs the printer to automatically switch from the Front Push to
Rear Push or Rear Push to Front Push paper paths when out of paper.
You can define continuous forms linking to one the following values:
Disabled (Default)
Enabled
To change or check the Continuous Forms Linking:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Printer Setup
Printer Setup
Rear Forms Backup
Forms Backup is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
CONFIGURATION MENU
Printer Setup
Allows the printer to back up the rear forms as
needed.
Prevents the printer from backing up rear forms.
No linking is to be done.
The Front Push and Rear Push continuous forms
paths are to be linked together so they are treated
by the printer as one continuous paper source.
109
Chapter 8. Printer Setup