Printer Compatibility 5 (Form Feed Suppression) - Compuprint Z03 User Manual

Printer Compatibility 5 (Form Feed Suppression)

This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer to suppress host form feed commands or to honor all host
form feeds. You can set this value to:
Disabled
(Default)
Enabled
Note: Operator panel form feeds are not affected.
To change or check form feed suppression, follow these steps:
10. Press START or RETURN to exit the Menu. See "Exiting the configuration
All form feed commands from the host are honored.
Form feed commands from the host are ignored if the printer is at top of
form and no data for the page was received.
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5. Press ENTER.
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
5 (FF Suppression)
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Form Feed Suppression is displayed.
9. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
Chapter 7. ASCII Configuration
83