Graphics Print Direction - Compuprint Z03 User Manual

5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for bar
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration

Graphics Print Direction

You can set the Graphics Print Direction to:
Unidirectional
Bidirectional (Default)
To change or check the graphics print direction, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration
Printer Setup
Bar Code Print Direction
code print direction is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
CONFIGURATION MENU
Printer Setup
Printer Setup
Graphics Print Direction
graphics print direction is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
Causes the printer to print in only one direction,
either from left to right or from right to left, for
each of the two passes of graphics printing on a
line.
Causes the printer to print as the printhead moves
in both directions. (This setting causes faster
throughput but may affect print quality. Verify that
the print quality is acceptable before running a
print job.)
115
Chapter 8. Printer Setup