Chapter 5. Attachment Options - Compuprint Z03 User Manual

Chapter 5. Attachment Options

This chapter describes the procedures for setting your printer attachment. Your
printer is capable of attaching individually through the following attachment
interface options:
v Bidirectional IEEE 1284 Parallel
v Serial RS232/C 9-Pin
v USB 2.0
v ASCII Ethernet 10/100 BaseT LAN
v ASCII-IPDS Ethernet 10/100 BaseT LAN
The attachments you have depend on what you requested at the time you placed
your order for the printer. To change or check the attachment selection, follow
these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO (down) until the printer
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the desired value is
5. Press ENTER.
6. Press START or RETURN to exit the Menu. See "Exiting the configuration
displays
CONFIGURATION MENU
Attachment
The printer displays
Attachment
* xxxxxx
Where xxxxxx (depending on your currently selected attachment) can be Hot
Port Switch, Parallel, Serial, USB, LAN ASCII, or LAN IPDS.
displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
57