Installing The Optional Second Tractor; Opening The Tractor Area Cover; Unpacking The Second Tractor - Compuprint Z03 User Manual

4. Press ENTER or START to print this test.
The READY indicator comes on and printing begins.
Press STOP if you want stop the test before it completes printing.
5. Wait for the printer to stop printing and the READY indicator to go off.
6. Press FORM FEED until you can remove the printout. The printout should be
clear and readable.

Installing the optional second tractor

Your printer comes with one forms tractor already installed on the printer. When
only this tractor is installed, the settings for the front paper path apply to the
paper loaded on this tractor. If instead the second (optional) tractor is installed in
the printer, the settings for the front path apply to the paper loaded with the upper
tractor, whereas the default tractor becomes the rear tractor.
1. Open the tractor area cover.
Figure 28. Opening the tractor area cover
2. Unpack the second tractor.
Figure 29. Unpacking the second tractor
Chapter 1. Getting Started
21