Print Quality; Example Of Lpi And - Compuprint Z03 User Manual

Figure 38. Example of LPI and page length
Note: This parameter can be overridden by the computer.
To change or check the MPL, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration

Print Quality

You can set the Print Quality for the printer to any of the following values:
v Fast Draft Quality (Default)
v DP (Data Processing) Quality
v DP Text Quality
v Near Letter Quality (NLQ).
Notes:
1. This parameter can be overridden by the computer.
2. Only Near Letter Quality is valid when either OCR-A or OCR-B is selected as
To change or check the Print Quality, follow these steps:
62
User's Guide
CONFIGURATION MENU
IPDS Configuration
IPDS Configuration
Maximum Page Length
MPL is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
the print language.