Printer Compatibility 3 (Automatic Line Feed On Carriage Return) - Compuprint Z03 User Manual

Printer Compatibility 3 (Automatic Line Feed on Carriage Return)

You can set the printer to perform an automatic line feed on carriage return. You
can set this value to:
Disabled
(Default)
Enabled
To change or check the automatic line feed on carriage return setting, follow these
steps:
10. Press START or RETURN to exit the Menu. See "Exiting the configuration
No line feed is performed after a carriage return.
An automatic line feed is performed after a carriage return.
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5. Press ENTER.
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
3 (Auto LF on CR)
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Automatic Line Feed on Carriage Return is displayed.
9. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
Chapter 7. ASCII Configuration
81