Printer Compatibility 4 (Automatic Carriage Return On Line Feed) - Compuprint Z03 User Manual

Printer Compatibility 4 (Automatic Carriage Return on Line Feed)

This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer to perform an automatic carriage return on a line feed. You
can set this value to:
Disabled
(Default)
Enabled
Note: If Emulation Mode is set to Epson-FX, an automatic carriage return is
To change or check the automatic carriage return after a line feed setting, follow
these steps:
10. Press START or RETURN to exit the Menu. See "Exiting the configuration
82
User's Guide
No automatic carriage return is performed after a line feed.
An automatic carriage return is performed after a line feed.
performed after a line feed regardless of the setting.
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5. Press ENTER.
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
4 (Auto CR on LF)
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Automatic Carriage Return on Line Feed is displayed.
9. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.