Maximum Page Length (Mpl); Example Of Lpi And - Compuprint Z03 User Manual

Maximum Page Length (MPL)

You can set the maximum page length (MPL) for the printer from 1–880 lines,
depending on the LPI setting. The default value is 66 lines.
MPL equals the number of print lines the printer can print on a page. MPL is the
page length stated in number of print lines.
See the following example to determine how to calculate the MPL.
The LPI and the page length determine the MPL. Multiply the lines per inch by the
page length to determine the appropriate MPL:
For example, if LPI=6 and page length=254 mm (10 in.), then
Figure 39. Example of LPI and page length
Note: This parameter can be overridden by the computer.
To change or check the MPL, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration
74
User's Guide
MPL = LPI x page length (in inches)
MPL = 6 x 10
MPL = 60
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
Maximum Page Length
MPL is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
254 mm
(10 in.)
C7QU5095