Smtp Service; Mail Server Address - Compuprint Z03 User Manual

SMTP Service

SMTP (Simple Mail Transfer Protocol) allows a mail server address to be entered
into the printer configuration to send automated e-mail notifications with printer
alert conditions.
You can set the SMTP Service to:
Disabled (Default)
Enabled
To change or check the SMTP Service:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER and the printer displays
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
8. Press ENTER.
9. Press START or RETURN to exit the Menu. See "Exiting the configuration

Mail Server Address

You can set the Mail Server Address:
These values set the Mail Server Address. This number is represented by a decimal
notation. The decimal values are divided into four fields by periods. Each field's
values can range from 0 to 255.
Note: You can only select Mail Server Address if the "SMTP Service" function
To change or check the Mail Server Address:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
104
User's Guide
Disables the SMTP (Simple Mail Transfer Protocol) service (disables
the reception/transfer/error service of the e-mail).
Enables the SMTP service (enables the reception/transfer/error service
of the e-mail).
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
LAN Interface
LAN Interface
SMTP Service
SMTP Service is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
For example, 000.000.000.000 (Default)
choice is Enabled.