Printing Custom Sets - Compuprint Z03 User Manual

Printing custom sets

Use this function to create a printout of the eight custom set values.
On the first page of the printout, each custom set is identified as either In Use or
as Factory Defaults.
In Use
Factory Defaults
If a custom set is identical to the factory defaults, it will be identified as Factory
Defaults. If the only change from factory defaults is a non-custom set parameter
value (a value that stays the same no matter which custom set you are using), only
the first custom set will be identified as In Use. The other custom sets will be
shown as factory defaults.
To print the custom sets:
1. Press STOP to make the printer not ready.
2. Press TEST.
3. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
4. Use ENTER or START to begin the test. The printout will list all the custom
5. Press CANCEL PRINT to make the printer ready, or RETURN to make the
OPERATOR PRINT TESTS
Print Custom Sets
sets.
The Ready indicator is lighted, and the Print Test prints. The printout is
complete when the Ready indicator is no longer lighted.
printer not ready.
At least one value in the custom set is different
from the factory default value. A flag (****) is
printed after each parameter value that is different
from the factory default.
A custom set that is identical to one of the factory
defaults.
Chapter 4. Configuration storage
55