Chapter 18. Supplies, Optional Features, And Maintenance; Continuous Forms Specifications - Compuprint Z03 User Manual

Chapter 18. Supplies, optional features, and maintenance

Continuous forms specifications .

Forms stacking recommendations
Forms stack input and output locations
Supplies . . . . . .
Optional features . . .
Continuous forms specifications
The 4247 Model Z03 operates with continuous forms. All forms should be
evaluated in the printer's functional environment for forms handling, print
registration, and print quality acceptability prior to use. The forms must meet the
following specifications:
Paper Criteria
Dimensions Width
Length
Single Part Weight
Thickness
Multiple Part Maximum parts
(Original + Copies)
Overall Thickness
Weight of top part
Attached sheet
individual weight
Carbon paper
individual weight
Notes:
1. Test forms less than 152.4 mm (6 in.) in length or width for satisfactory
2. For optimum performance, restrict the printable area to be within 6.4 mm (0.25
. . . . . . 149
. . . . . . 150
. . . . 150
. . . . . . . . . 151
. . . . . . . . . 151
Characteristics
76.2 to 431.8 mm
3 to 17 in.
76.2 to 609.6 mm
3 to 24 in.
55 to 150 g/m
15 to 40 lb
0.08 to 0.635 mm
0.003 to 0.025 in.
1 + 7 Chemical
1 + 5 Carbon Paper
0.08 to 0.635 mm
0.003 to 0.025 in.
55 to 150 g/m
15 to 40 lb
45 to 75 g/m
12 to 20 lb
14 to 35 g/m
4 to 9 lb
stacking. These forms may require additional operator attention.
in.) from all edges, holes, or folds on the forms.
Maintenance. . . . .
Removing the ribbon cartridge
Cleaning the Printer .
Cleaning Inside the Printer .
Cleaning the Outside Covers .
Continuous Forms
Front Push, Rear Push
2
2
2
2
. . . . . . . . . 152
. . . . . . 152
. . . . . . . . . 152
. . . . . . 153
. . . . . 153
149