Printer Compatibility 9 (20 Cpi) - Compuprint Z03 User Manual

Printer Compatibility 9 (20 CPI)

This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer to allow 20 CPI condensed print from the data stream. For
more information, see the 4247 Model X03 Printer Programmer Manual.
You can set this value to:
Disabled
Enabled
(Default)
To change or check 20 CPI, follow these steps:
10. Press START or RETURN to exit the Menu. See "Exiting the configuration
Does not allow 20 CPI to be accessed by the data stream.
Allows 20 CPI to be accessed by the data stream.
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5. Press ENTER.
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
9 (20 CPI)
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for 20
CPI mode is displayed.
9. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
Chapter 7. ASCII Configuration
87