Lines Per Inch (Lpi) - Compuprint Z03 User Manual

To change or check the CPI value, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press ENTER to display the current value.
5. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for CPI
6. Press ENTER.
7. Press START or RETURN to exit the Menu. See "Exiting the configuration

Lines Per Inch (LPI)

You can set the lines per inch (LPI) for the printer to either of the following values:
v 6 (Default)
v 8
Note: This parameter can be overridden by the computer.
To change or check the LPI, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for LPI
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the configuration
72
User's Guide
CONFIGURATION MENU
ASCII Configuration
The printer displays
ASCII Configuration
Characters Per Inch
is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.
CONFIGURATION MENU
ASCII Configuration
ASCII Configuration
Lines Per Inch
is displayed.
An asterisk (*) will be displayed in front of the selected value.
menu" on page 39.