Configuration Problems; Miscellaneous Problems - Compuprint X03 User Manual

Problem: Ribbon snagging, tearing, or not moving
1:
2:
Problem: Line-to-line horizontal misregistration
1:

Configuration problems

Problem: Printer doesn't print or prints wrong characters
1:

Miscellaneous problems

Problem: Printer has no power
1:
Problem: Throughput of printer at half speed
2:
162
User's Guide
The ribbon is worn.
Solution: Replace the ribbon cartridge.
The ribbon cartridge is not properly installed.
Solution: Remove and then reinstall the same ribbon.
The dot registration of the characters printed is not aligned.
Solution: See Chapter 9, "Printer adjustments," on page 115.
Nothing is printed or the wrong characters print.
Solution:
v Ensure the printer cable is attached to the host.
v Check the configuration menu parameter values for your printer
attachment (see Chapter 7, "ASCII Configuration," on page 67).
The power cord is not connected.
Solution: Ensure the power cord is plug into the back of the printer and
also into the wall outlet.
The Quiet Print function is set on.
Solution: Ensure the "Quiet Print" function in the Printer Configuration
menu is disabled.