Lines Per Inch (Lpi) - Compuprint X03 User Manual

Lines Per Inch (LPI)

This parameter allows the printer to accept or ignore (override) the Lines Per Inch
commands that are sent by the host data stream. You can set Lines Per Inch to:
Disabled
(Default)
Enabled
To change or check the Lines Per Inch setting:
10. Press START or RETURN to exit the Menu. See "Exiting the Configuration
84
User's Guide
The printer accepts and processes commands received from the host data
stream for Lines Per Inch selection.
The printer ignores commands received from the host data stream for
Characters Per Inch. The printer will use the Lines Per Inch value set in the
printer configuration.
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Override Host
5. Press ENTER, and the printer displays
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer plays
Override Host
Lines Per Inch
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Lines Per Inch is displayed.
9. Press ENTER to display the current value.
An asterisk (*) is displayed in front of the selected value.
Menu" on page 39.