Jam Sensors - Compuprint X03 User Manual

Jam Sensors

You can set Jam Sensors to either of the following values:
Enabled (Default)
Disabled
To change or check the Jam Sensors category:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for jam
7. Press ENTER.
8. Press START or RETURN to exit the Menu. See "Exiting the Configuration
CONFIGURATION MENU
Printer Setup
Printer Setup
Jam Sensors
sensors is displayed.
An asterisk (*) will be displayed in front of the selected value.
Menu" on page 39.
Enables the paper jam sensors on the front and
rear tractors. This setting alerts the operator with
an 002 FORMS JAMMED FRONT or 020 FORMS JAMMED
REAR message on the operator panel when a
jammed form is detected in one of the paper paths.
Disables the paper jam sensors. We recommend
that these sensors not be disabled.
113
Chapter 8. Printer setup