Input Buffer Size - Compuprint X03 User Manual

3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER to display
Serial Interface
Interface Type
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Interface Type is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See "Exiting the Configuration
Menu" on page 39.

Input Buffer Size

You can set the Input Buffer Size to:
v 256
v 2K
v 12K
v 32K (Default)
v 64K
v 128K
To change or check the Input Buffer Size:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER and the printer displays
Serial Interface

Input Buffer Size

6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Input Buffer Size is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See "Exiting the Configuration
Menu" on page 39.
Chapter 7. ASCII Configuration
89